1-800-955-0225
sales@ce3s.com
Download Line Card
DESCO Products and Services
Learn about the DESCO products and services offered by CE3S.
CE3S Partner
DESCO Makes ESD Control Products and Production Supplies
As North America’s largest manufacturer of static control products, DESCO makes a wide range of ESD control products and production supplies. This page includes a grounding monitor, mat cleaner, foot grounders, wrist straps, overhead and benchtop ionizers, an outlet analyzer and wrist strap tester, and static shielding bags.
Cumberland Electronics Strategic Supply Solutions (CE3S) supplies DESCO products, offers ESD surveys, and runs the T.E.A.M. Program with DESCO. Tell us what you’re protecting and how your work areas are set up, and we’ll help you choose products and quote the order. You can also shop DESCO online at Production Supply Store, our ecommerce site.
Why Order DESCO Through CE3S
- Family-owned and serving manufacturers since 1962
- Help choosing and cross-referencing parts
- No minimum order constraints
- One point of contact from quote to delivery
- 350+ product lines on one account
Request an ESD Survey
With an ESD survey, you review your ESD plan against ANSI/ESD S20.20 and get a confidential report and a custom RPL.
Build Your ESD Control Program With T.E.A.M.
Through the T.E.A.M. Program, DESCO and Cumberland Electronics help you create and manage an ESD control program.
Download DESCO Brochures and Reports
The ESD Control Products Brochure, the ESD Control Program Brochure, and DESCO qualification reports are available as PDFs, along with the full DESCO Products Brochure.
DESCO Mini Monitor (19341)
An illuminated enclosure on the Mini Monitor shows grounding status by color. Green means the operator and the work surface both have a secure ground connection, red signals a grounding failure, and blue shows the operator port is unoccupied. That visual signal matters because operators wearing headphones may not hear an audible alarm.
Response time is less than 50 milliseconds, so operators know right away if a wrist strap or work surface loses its ground. ParkSnap™ lets operators disconnect and park the wristband during equipment changes without a false alarm, and Wave Distortion Technology applies a continuous low-voltage signal that catches circuit discontinuities with minimal false alarms.
Features and Highlights
- Lit enclosure shows grounding status at a glance
- Green for ground, red for failure, blue for open port
- Alarm response in less than 50 milliseconds
- ParkSnap™ wristband parking without false alarms
- Wave Distortion Technology for fewer false alarms
Reztore Surface and Mat Cleaner
Reztore® Surface and Mat Cleaner comes in a 1 quart trigger spray bottle and removes dust, grease, grime, fingerprints, solder flux, and other contaminants from ESD mats and other surfaces. The alcohol-free formula won’t dry out mats the way alcohol-based cleaners can, and it leaves no silicone or insulative residue to interfere with conductive or dissipative mats.
Because the formula is non-hazardous, non-flammable green chemistry, it needs no special handling for shipping or storage. With the Reztore® Refill System, you can reuse bottles and save on cost.
Features and Highlights
- Removes contaminants from ESD mats and surfaces
- Alcohol-free formula that doesn’t dry out mats
- Non-hazardous, non-flammable green chemistry
- No silicone or insulative residues after cleaning
- Reztore® Refill System for reusing bottles
Shock Cord Foot Grounder
The Shock Cord Full Coverage Foot Grounder converts non-ESD footwear into footwear that provides a path to ground and doesn’t generate a charge. An elastic shock cord attachment fits most shoe styles and sizes, and the replaceable conductive 8-strand nylon polyester grounding tab improves hygiene and keeps a reliable connection with the operator’s sweat layer.
Walking voltage is less than 60 volts, which meets the ANSI/ESD S20.20 requirement for an ESD footwear component in a flooring and footwear grounding system. Tab to cup resistance is 1 x 106 to less than 1 x 107 ohms at 100 volts, within ANSI/ESD S20.20 limits. Contact points stay on the floor through normal walking, even when both heels are off the ground. Because the material is non-marring, it won’t mark floors or shoes, which keeps maintenance costs down.
Features and Highlights
- Converts non-ESD shoes to ESD footwear
- Elastic shock cord for a comfortable fit
- Replaceable conductive grounding tab
- Less than 60 volts of walking voltage
- Meets ANSI/ESD S20.20 requirements for ESD footwear
Request Info or a Demo
Tell us which DESCO product you’re looking at and we’ll send details or set up a hands-on demo.
Adjustable Wrist Strap (6′ Coil Cord)
An extra wide, soft elastic band keeps the wrist band comfortable, and silver impregnated polypropylene knitted on the inside gives it superior conductivity and antibacterial properties. It’s adjustable and date-coded, and it meets UL and OSHA requirements for operator safety.
A coil cord adds strain relief, a contoured spring supported banana plug, and a low profile snap for convenience and a longer life. Its six-foot working radius gives operators room to move around the work area, and a one-megohm series resistor adds safety. The cord is UL listed, and both the band and the cord are made in the USA.
Features and Highlights
- Extra wide, soft elastic band for comfort
- Silver impregnated for conductivity
- Coil cord with superior strain relief
- One-megohm series resistor for safety
- UL listed, date-coded, and made in the USA
Chargebuster Overhead Ionizer
Built as a two fan steady-state DC ionizer, the Chargebuster covers a 2′ x 4′ area and neutralizes electrostatic charges on insulators and ungrounded conductors. With a discharge time of 3 seconds or less and a ±10 volts offset voltage, it meets the limits for ionization in electronics manufacturing areas under ANSI/ESD S20.20 and ESD TR53.
A 700 lumen LED panel light improves visibility, and three fan speeds cover different applications. Sealed plenum airflow prevents contamination at the workstation, and an auto-feedback system sounds audible and visual alarms if supply voltage drops. Field-replaceable emitter pins keep downtime short.
Features and Highlights
- 2′ x 4′ coverage area
- Discharges in 3 seconds or less, ±10 volts offset
- Complies with ANSI/ESD S20.20 and ESD TR53
- 700 lumen LED panel light
- Auto-feedback system with audible and visual alarms
Zero Volt Benchtop Ionizer
As a single fan steady-state DC ionizer, the Zero Volt covers a 16″ x 24″ area and neutralizes electrostatic charges on insulators and ungrounded conductors. Discharge time is less than 2 seconds with a ±3 volts balance at 12″, which meets the limits for ionization in electronics manufacturing areas under ANSI/ESD S20.20 and ESD TR53.
Its sealed plenum airflow prevents contamination, and the auto-feedback system sounds audible and visual alarms if supply voltage drops. A powder-coated enclosure minimizes debris and corrosion, so it suits clean or sensitive areas, and it works with a range of accessories.
Features and Highlights
- 16″ x 24″ coverage area
- Discharges in under 2 seconds, ±3 volts at 12″
- Within ANSI/ESD S20.20 and ESD TR53 limits
- Auto-feedback system with audible and visual alarms
- Low, medium, and high fan speeds
Get Pricing on DESCO Products
Send the product names or part numbers you need and we’ll put a quote together.
AC Outlet Analyzer and Wrist Strap Tester
The North American Outlet Analyzer, Banana Jack, and Wrist Strap Tester verifies proper AC outlet wiring, provides a grounding point, and tests the path-to-ground integrity of an operator’s wrist strap. A new ground terminal for #8 rings gives you a verified ground point for mats, carts, tools, and other items.
It tests the operator’s path to ground within ANSI/ESD S20.20 wrist strap limits. Visual and audible indicators show pass and fail conditions for the outlet and a pass condition for the wrist strap.
Features and Highlights
- Verifies proper AC outlet wiring
- Ground terminal for mats, carts, and tools
- Tests operator path to ground per ANSI/ESD S20.20
- Visual and audible pass and fail indicators
- Calibration traceable to NIST
DESCO Static Shielding Bags
Static shielding bags from DESCO protect electrostatic sensitive devices in storage and transit. Each bag has three layers. A static dissipative outer layer, an aluminum shielding middle layer, and an anti-static inner layer protect the contents from electrostatic discharge and electromagnetic interference.
They’re durable, resist tears and punctures, and are translucent, so the contents are easy to identify. To browse bags by size and type, use the static bag selector on Production Supply Store, our ecommerce site.
Features and Highlights
- Protects electrostatic sensitive devices
- Three-layer construction
- Shields against ESD and electromagnetic interference
- Durable and resistant to tears and punctures
- Translucent material for easy identification of contents
About DESCO
DESCO Grew Into North America’s Largest Static Control Manufacturer
Founded in 1979, Desco Industries Inc. grew out of Delta Electrical Specialty Company, which was incorporated in 1956. It started with the Circuitracer continuity and voltage tester and now includes APR, Desco Asia, EasyBraid, EMIT, Menda, Protektive Pak, SCS, and Statguard Flooring. Acquisitions, including 3M Static Control in 2015, made DESCO North America’s largest manufacturer of static control products.
CE3S Partner
Request Info or a Demo
Ask About DESCO Products
Share your contact info and a CE3S team member will follow up about DESCO ESD control products, ESD surveys, and the T.E.A.M. Program, including pricing and demos.
- Send the form, call, or email us.
- We confirm the products and part numbers for your request.
- You get a quote and one CE3S contact for the order.
Tell Us How to Reach You
Fields marked * are required.