Sign-up to receive our newsletter.
AIM Glow Core Wire Solder
Glow Core is a no-clean cored wire solder designed to offer excellent wetting characteristics with both leaded and lead-free alloys. Its unique activator enables fast cycle time and powerful capillary action, promoting better thermal transfer and providing enhanced solder penetration into plated through holes or surface mount interconnections. This results in low-to-medium post-process residues that are electrically safe and do not require cleaning. To achieve the best results, use a solder iron tip temperature between 300° – 400°C (575° – 750°F) for leaded alloys and 370° – 425°C (700° – 800°F) for lead-free and SN100C® alloys. If additional flux is needed, AIM NC280 flux is recommended.
Glow Core is available in Sn/Pb, Sn/Cu, SAC, SN100C®, REL61™, and REL22™ alloys, with potential availability of other alloys, diameters, and spool sizes upon request. Store cored wire in a clean, dry area away from moisture and sunlight, for up to 7 years at temperatures less than 85°F (29°C). Avoid freezing this product.
When needed, Glow Core can be cleaned with a saponified wash or many commercially available flux removers. For specific information, contact AIM. Always use this product with adequate ventilation and appropriate personal protective equipment. Refer to the accompanying Safety Data Sheet for any specific emergency information and do not dispose of any hazardous materials in non-approved containers.
- Time Parameters: 7 Years < 85°F (< 29°C)
- Store cored wire in a clean, dry area away from moisture and sunlight
- Do not freeze this product.
- Fast Wetting with Pb-Free Alloys
- Pleasant Odor
- Clear Residue
- Extends Solder Tip Life
- ROL0 per IPC J-Std-004
- REACH and RoHS Compliant*
- Passes BONO Testing